[SP-pm] [cpan - o retorno]
Lorn
lorn.br em gmail.com
Quarta Janeiro 24 17:52:20 PST 2007
Andre, o que aconteceu foi um erro no teste do programa, o programa foi
compilado normalmente, o erro aconteceu por causa disso:
t/board............Can't locate List/Compare.pm in @INC (@INC contains:
/root/.cpan/build/Chess-0.6.0/blib/lib
você não tem instalado o List::Compare, que não é um pre-requisito para
instalar, mais sim para testar, se voce está com pressa digita
force installl Modulo::Modulo
Se não instale o List::Compare e tente de novo ;)
Que erro que acontece quando você tenta instalar o catalyst?
On 1/24/07, André Garcia Carneiro <andre.garcia.carneir em terra.com.br> wrote:
>
> Salve Monges!
>
>
> Tive que me ausentar devido a forças maiores, mas continuo com o meu
> problema do CPAN. Espero que não se
> importem em me ajudar com isso.
>
> Só pra re-lembrar, estou tentando instalar o Catalyst no Slackware 10.1, e
> o meu CPAN não funciona direito. O
> problema aparente é que no final da compilação ele não consegue instalar
> os pacotes nos seus respectivos
> diretórios, por alguma razão. Como eu costumo resolver isso? Baixo o
> source e compilo na mão, mas com o
> Catalyst fica inviável, já que são muitas dependências.
>
> Lembrando mais:
>
> S.O. : Linux Slackware 10.1
>
> usuário rodando o cpan: root
>
> @INC (# perl -e "print @INC;") :
>
> /usr/lib/perl5/5.8.7/i486-linux/usr/lib/perl5/5.8.7/usr/lib/perl5/site_perl/5.8.7/i486-linux/usr/lib/perl5/site_perl/5.8.7/usr/lib/perl5/site_perl
>
>
> Abaixo coloquei o ciclo de instalação do pacote através do cpan(como root
> digite 'cpan' e depois fiz install
> Chess::Game), logo abaixo. Um dos problemas que eu notei é que ele não
> conseguiu encontrar a package
> List::Compare, embora tenha continuado a instalação(pode ser q a
> instalação dessa package não seja mandatória).
> Tentei instalar a List::Compare também, mas embora não tenha ocorrido
> nenhum erro, quando tento fazer use na
> package, perl me retorna uma mensagem dizendo que não encontrou a p... da
> package em @INC.
>
> Não sei se ajuda, mas os builds estão sendo construídos em
> /root/.cpan/Build.
>
> Por favor me ajudem!!!
>
>
>
> Resultado do teste de instalação do CPAN, para o pacote Chess::Game:
>
> cpan[4]> install Chess::Game
> Running install for module Chess::Game
> Running make for B/BJ/BJR/Chess-0.6.0.tar.gz
> Use of uninitialized value in pattern match (m//) at
> /usr/lib/perl5/5.8.7/CPAN/HandleConfig.pm line 335, <FIN>
> line 4.
>
> Trying with "/usr/bin/wget -O
> /root/.cpan/sources/authors/id/B/BJ/BJR/Chess-0.6.0.tar" to get
>
> ftp://ftp.is.co.za/programming/perl/CPAN/authors/id/B/BJ/BJR/Chess-0.6.0.tar.gz
> --17:12:14--
> ftp://ftp.is.co.za/programming/perl/CPAN/authors/id/B/BJ/BJR/Chess-0.6.0.tar.gz
> => `/root/.cpan/sources/authors/id/B/BJ/BJR/Chess-0.6.0.tar'
> Resolving ftp.is.co.za... 196.4.160.12
> Connecting to ftp.is.co.za|196.4.160.12|:21... connected.
> Logging in as anonymous ... Logged in!
> ==> SYST ... done. ==> PWD ... done.
> ==> TYPE I ... done. ==> CWD /programming/perl/CPAN/authors/id/B/BJ/BJR
> ... done.
> ==> PASV ... done. ==> RETR Chess-0.6.0.tar.gz ... done.
> Length: 22,058 (22K) (unauthoritative)
>
> 100%[===============================================================================>]
> 22,058 10.43K/s
>
> 17:12:27 (10.42 KB/s) - `/root/.cpan/sources/authors/id/B/BJ/BJR/Chess-
> 0.6.0.tar' saved [22058]
>
> CPAN: checksum security checks disabledbecause Digest::SHA not installed.
> Chess-0.6.0/
> Chess-0.6.0/lib/
> Chess-0.6.0/lib/Chess.pm
> Chess-0.6.0/lib/Chess/
> Chess-0.6.0/lib/Chess/Game/
> Chess-0.6.0/lib/Chess/Game/MoveListEntry.pm
> Chess-0.6.0/lib/Chess/Game/MoveList.pm
> Chess-0.6.0/lib/Chess/Game.pm
> Chess-0.6.0/lib/Chess/Board.pm
> Chess-0.6.0/lib/Chess/Piece.pm
> Chess-0.6.0/lib/Chess/Board/
> Chess-0.6.0/lib/Chess/Piece/
> Chess-0.6.0/lib/Chess/Piece/Pawn.pm
> Chess-0.6.0/lib/Chess/Piece/Bishop.pm
> Chess-0.6.0/lib/Chess/Piece/Queen.pm
> Chess-0.6.0/lib/Chess/Piece/Rook.pm
> Chess-0.6.0/lib/Chess/Piece/King.pm
> Chess-0.6.0/lib/Chess/Piece/Knight.pm
> Chess-0.6.0/MANIFEST
> Chess-0.6.0/t/
> Chess-0.6.0/t/game.t
> Chess-0.6.0/t/movelist.t
> Chess-0.6.0/t/queen.t
> Chess-0.6.0/t/king.t
> Chess-0.6.0/t/movelistentry.t
> Chess-0.6.0/t/knight.t
> Chess-0.6.0/t/board.t
> Chess-0.6.0/t/rook.t
> Chess-0.6.0/t/stalemate.t
> Chess-0.6.0/t/pawn.t
> Chess-0.6.0/t/checkmate.t
> Chess-0.6.0/t/bishop.t
> Chess-0.6.0/t/piece.t
> Chess-0.6.0/TODO
> Chess-0.6.0/Changes
> Chess-0.6.0/README
> Chess-0.6.0/Makefile.PL
>
> CPAN.pm: Going to build B/BJ/BJR/Chess-0.6.0.tar.gz
>
> Checking if your kit is complete...
> Looks good
> Writing Makefile for Chess
> cp lib/Chess/Game.pm blib/lib/Chess/Game.pm
> cp lib/Chess/Game/MoveList.pm blib/lib/Chess/Game/MoveList.pm
> cp lib/Chess/Piece/King.pm blib/lib/Chess/Piece/King.pm
> cp lib/Chess/Board.pm blib/lib/Chess/Board.pm
> cp lib/Chess/Piece/Queen.pm blib/lib/Chess/Piece/Queen.pm
> cp lib/Chess/Piece/Knight.pm blib/lib/Chess/Piece/Knight.pm
> cp lib/Chess/Piece/Pawn.pm blib/lib/Chess/Piece/Pawn.pm
> cp lib/Chess/Game/MoveListEntry.pm blib/lib/Chess/Game/MoveListEntry.pm
> cp lib/Chess.pm blib/lib/Chess.pm
> cp lib/Chess/Piece.pm blib/lib/Chess/Piece.pm
> cp lib/Chess/Piece/Bishop.pm blib/lib/Chess/Piece/Bishop.pm
> cp lib/Chess/Piece/Rook.pm blib/lib/Chess/Piece/Rook.pm
> Manifying blib/man3/Chess::Game::MoveList.3
> Manifying blib/man3/Chess::Game.3
> Manifying blib/man3/Chess::Piece::King.3
> Manifying blib/man3/Chess::Piece::Queen.3
> Manifying blib/man3/Chess::Board.3
> Manifying blib/man3/Chess::Piece::Knight.3
> Manifying blib/man3/Chess::Piece::Pawn.3
> Manifying blib/man3/Chess::Game::MoveListEntry.3
> Manifying blib/man3/Chess.3
> Manifying blib/man3/Chess::Piece.3
> Manifying blib/man3/Chess::Piece::Rook.3
> Manifying blib/man3/Chess::Piece::Bishop.3
> /usr/bin/make -- OK
> Running make test
> Prepending /root/.cpan/build/IO-Compress-Base-2.003/blib/arch
> /root/.cpan/build/IO-Compress-Base-2.003/blib/lib
> /root/.cpan/build/PathTools-3.24/blib/arch /root/.cpan/build/PathTools-
> 3.24/blib/lib
> /root/.cpan/build/Compress-Raw-Zlib-2.003/blib/arch
> /root/.cpan/build/Compress-Raw-Zlib-2.003/blib/lib
> /root/.cpan/build/File-Which-0.05/blib/arch /root/.cpan/build/File-
> Which-0.05/blib/lib to PERL5LIB.
> PERL_DL_NONLAZY=1 /usr/bin/perl5.8.7 "-MExtUtils::Command::MM" "-e"
> "test_harness(0, 'blib/lib', 'blib/arch')"
> t/*.t
> t/bishop...........ok
> t/board............Can't locate List/Compare.pm in @INC (@INC contains:
> /root/.cpan/build/Chess-0.6.0/blib/lib
> /root/.cpan/build/Chess-0.6.0/blib/arch /root/.cpan/build/IO-
> Compress-Base-2.003/blib/arch
> /root/.cpan/build/IO-Compress-Base-2.003/blib/lib
> /root/.cpan/build/PathTools-3.24/blib/arch
> /root/.cpan/build/PathTools-3.24/blib/lib /root/.cpan/build/Compress-
> Raw-Zlib-2.003/blib/arch
> /root/.cpan/build/Compress-Raw-Zlib-2.003/blib/lib /root/.cpan/build/File-
> Which-0.05/blib/arch
> /root/.cpan/build/File-Which-0.05/blib/lib /usr/lib/perl5/5.8.7/i486-linux
> /usr/lib/perl5/5.8.7
> /usr/lib/perl5/site_perl/5.8.7/i486-linux /usr/lib/perl5/site_perl/5.8.7
> /usr/lib/perl5/site_perl .) at
> t/board.t line 4.
> BEGIN failed--compilation aborted at t/board.t line 4.
> # Looks like your test died before it could output anything.
> t/board............dubious
> Test returned status 255 (wstat 65280, 0xff00)
> DIED. FAILED tests 1-36
> Failed 36/36 tests, 0.00% okay
> t/checkmate........ok
> t/game.............ok
> t/king.............ok
> t/knight...........ok
> t/movelist.........ok
> t/movelistentry....ok
> t/pawn.............ok
> t/piece............ok
> t/queen............ok
> t/rook.............ok
> t/stalemate........ok
> Failed Test Stat Wstat Total Fail Failed List of Failed
>
> -------------------------------------------------------------------------------
> t/board.t 255 65280 36 72 200.00% 1-36
> Failed 1/13 test scripts, 92.31% okay. 36/310 subtests failed, 88.39%okay.
> make: *** [test_dynamic] Error 255
> /usr/bin/make test -- NOT OK
> Running make install
> make test had returned bad status, won't install without force
> Failed during this command:
> BJR/Chess-0.6.0.tar.gz : make_test NO
>
> cpan[5]>
>
>
>
>
>
>
>
>
> --
> André Garcia Carneiro
> Developer(Perl/PHP)
> Member of "São Paulo Perl Mongers" - http://sao-paulo.pm.org
>
> _______________________________________________
> SaoPaulo-pm mailing list
> SaoPaulo-pm em pm.org
> http://mail.pm.org/mailman/listinfo/saopaulo-pm
>
--
Lindolfo "Lorn" Rodrigues
- www.slackwarezine.com.br
- http://lornlab.org
- http://sao-paulo.pm.org
use Catalyst;
-------------- Próxima Parte ----------
Um anexo em HTML foi limpo...
URL: http://mail.pm.org/pipermail/saopaulo-pm/attachments/20070124/4bbb233f/attachment-0001.html
Mais detalhes sobre a lista de discussão SaoPaulo-pm